HUASHENG PRECISION · Updated November 20, 2026
Sheet metal gauge chart: gauge to mm and inch by material
Gauge-to-thickness conversion for steel, galvanized steel, stainless steel and aluminum sheet, with metric sheet thicknesses, sheet sizes and weight. Reference values from the gauge systems and published mill catalogues.
Sheet metal gauge chart: gauge to mm and inch
A gauge number is not a unit of length. The same number is a different thickness for uncoated steel, galvanized steel, stainless steel and aluminum, because each uses its own gauge system. Values are shown as mm (inch).
Swipe horizontally to read the table.
| Gauge | Steel (uncoated) | Galvanized steel | Stainless steel | Aluminum |
|---|---|---|---|---|
| 3 | 6.073 (0.2391) | — | — | — |
| 4 | 5.695 (0.2242) | — | — | — |
| 5 | 5.314 (0.2092) | — | — | — |
| 6 | 4.935 (0.1943) | — | — | 4.115 (0.1620) |
| 7 | 4.554 (0.1793) | — | 4.763 (0.1875) | 3.665 (0.1443) |
| 8 | 4.176 (0.1644) | 4.270 (0.1681) | 4.366 (0.1719) | 3.264 (0.1285) |
| 9 | 3.797 (0.1495) | 3.891 (0.1532) | 3.970 (0.1563) | 2.906 (0.1144) |
| 10 | 3.416 (0.1345) | 3.510 (0.1382) | 3.571 (0.1406) | 2.588 (0.1019) |
| 11 | 3.038 (0.1196) | 3.132 (0.1233) | 3.175 (0.1250) | 2.304 (0.0907) |
| 12 | 2.657 (0.1046) | 2.753 (0.1084) | 2.779 (0.1094) | 2.052 (0.0808) |
| 13 | 2.278 (0.0897) | 2.372 (0.0934) | 2.383 (0.0938) | 1.829 (0.0720) |
| 14 | 1.897 (0.0747) | 1.994 (0.0785) | 1.984 (0.0781) | 1.628 (0.0641) |
| 15 | 1.709 (0.0673) | 1.803 (0.0710) | 1.786 (0.0703) | 1.450 (0.0571) |
| 16 | 1.519 (0.0598) | 1.613 (0.0635) | 1.588 (0.0625) | 1.290 (0.0508) |
| 17 | 1.367 (0.0538) | 1.461 (0.0575) | 1.430 (0.0563) | 1.151 (0.0453) |
| 18 | 1.214 (0.0478) | 1.311 (0.0516) | 1.270 (0.0500) | 1.024 (0.0403) |
| 19 | 1.062 (0.0418) | 1.158 (0.0456) | 1.113 (0.0438) | 0.912 (0.0359) |
| 20 | 0.912 (0.0359) | 1.006 (0.0396) | 0.953 (0.0375) | 0.813 (0.0320) |
| 21 | 0.836 (0.0329) | 0.930 (0.0366) | 0.874 (0.0344) | 0.724 (0.0285) |
| 22 | 0.759 (0.0299) | 0.853 (0.0336) | 0.795 (0.0313) | 0.643 (0.0253) |
| 23 | 0.683 (0.0269) | 0.777 (0.0306) | 0.714 (0.0281) | 0.574 (0.0226) |
| 24 | 0.607 (0.0239) | 0.701 (0.0276) | 0.635 (0.0250) | 0.511 (0.0201) |
| 25 | 0.531 (0.0209) | 0.627 (0.0247) | 0.556 (0.0219) | 0.455 (0.0179) |
| 26 | 0.455 (0.0179) | 0.551 (0.0217) | 0.478 (0.0188) | 0.404 (0.0159) |
| 27 | 0.417 (0.0164) | 0.513 (0.0202) | 0.437 (0.0172) | 0.361 (0.0142) |
| 28 | 0.378 (0.0149) | 0.475 (0.0187) | 0.396 (0.0156) | 0.320 (0.0126) |
Uncoated steel: Manufacturers’ Standard Gauge. Galvanized steel: galvanized sheet gauge, which includes the coating. Stainless steel: U.S. Standard Gauge. Aluminum: Brown & Sharpe (American Wire Gauge). Inch values are the nominal decimal equivalents; millimetre values are converted and rounded to 0.001 mm. Actual sheet is supplied to the thickness tolerance of the applicable material standard.
Metric sheet thicknesses in mill catalogues
Outside North America, sheet is ordered by thickness in millimetres. The table lists the thicknesses that appear in the mass tables of Nippon Steel product catalogues for cold-rolled, hot-rolled and stainless sheet.
Swipe horizontally to read the table.
| Material | Thickness (mm) |
|---|---|
| Cold-rolled steel sheet (SPCC and similar) | 0.3, 0.35, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.4, 1.6, 2.0, 2.3, 2.6, 2.9, 3.2 |
| Hot-rolled steel sheet (SPHC and similar) | 1.2, 1.6, 1.8, 2.0, 2.3, 2.6, 2.9, 3.0, 3.2, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10, 11, 12 |
| Cold-rolled stainless steel sheet (SUS304 and similar) | 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5, 2.0, 2.3, 2.5, 3.0, 3.2, 4.0, 5.0, 6.0 |
Sources: Nippon Steel catalogues for cold-rolled sheet, hot-rolled sheet and stainless cold-rolled sheet. The cold-rolled table also lists thinner gauges from 0.15 mm and the hot-rolled table continues to 19 mm. JIS G 3141 (cold-rolled) and JIS G 3193 (hot-rolled) each define a table of standard thicknesses; refer to the standards for those lists. What can actually be purchased depends on the mill and the distributor.
Standard sheet sizes
Swipe horizontally to read the table.
| Name | Size (mm) | Note |
|---|---|---|
| 3 × 6 | 914 × 1829 | 3 ft × 6 ft |
| 4 × 8 | 1219 × 2438 | 4 ft × 8 ft |
| 4 × 10 | 1219 × 3048 | 4 ft × 10 ft |
| 5 × 10 | 1524 × 3048 | 5 ft × 10 ft |
| 1 m × 2 m | 1000 × 2000 | Stainless steel sheet |
Sheet weight by thickness
Weight per square metre = thickness (mm) × density (g/cm³). The table uses 7.85 g/cm³ for carbon steel, 7.93 for SUS304 and 2.68 for A5052.
Swipe horizontally to read the table.
| Thickness (mm) | Carbon steel (kg/m²) | SUS304 (kg/m²) | A5052 (kg/m²) |
|---|---|---|---|
| 0.5 | 3.92 | 3.96 | 1.34 |
| 0.8 | 6.28 | 6.34 | 2.14 |
| 1.0 | 7.85 | 7.93 | 2.68 |
| 1.2 | 9.42 | 9.52 | 3.22 |
| 1.6 | 12.56 | 12.69 | 4.29 |
| 2.0 | 15.70 | 15.86 | 5.36 |
| 2.3 | 18.05 | 18.24 | 6.16 |
| 3.2 | 25.12 | 25.38 | 8.58 |
| 4.5 | 35.32 | 35.69 | 12.06 |
| 6.0 | 47.10 | 47.58 | 16.08 |
Example: one 914 × 1829 mm carbon steel sheet weighs about 13.1 kg at 1.0 mm, 21.0 kg at 1.6 mm, 30.2 kg at 2.3 mm, 42.0 kg at 3.2 mm. These are calculated values; actual weight varies with thickness tolerance.
How to specify sheet thickness on a drawing
State the thickness as a decimal dimension with its unit, together with the material grade and standard. A gauge number alone is ambiguous, because it does not say which gauge system applies.
If a drawing made for gauge sheet will be produced in metric sheet, confirm the substitute thickness with the designer. For example, 16 gauge steel is 1.519 mm; nearby metric thicknesses are 1.5 mm and 1.6 mm, and the choice changes bend allowances and fits.
Frequently asked questions
How thick is 16 gauge steel in mm?
16 gauge uncoated steel is 1.519 mm (0.0598 in). 16 gauge galvanized steel is 1.613 mm, 16 gauge stainless steel is 1.588 mm and 16 gauge aluminum is 1.290 mm.
Is 14 gauge thicker than 16 gauge?
Yes. A lower gauge number is a thicker sheet. 14 gauge steel is 1.897 mm and 16 gauge steel is 1.519 mm.
How thick is 11 gauge steel?
11 gauge uncoated steel is 3.038 mm (0.1196 in). 11 gauge stainless steel is 3.175 mm (0.1250 in).
Why is the same gauge a different thickness in aluminum?
Aluminum sheet uses the Brown & Sharpe gauge, while steel uses the Manufacturers’ Standard Gauge and stainless steel the U.S. Standard Gauge. 10 gauge is 3.416 mm in steel but 2.588 mm in aluminum.
Standards and references
- Nippon Steel — cold-rolled steel sheet catalogue (mass table)
- Nippon Steel — hot-rolled steel sheet catalogue (cut-length mass table)
- Nippon Steel — stainless cold-rolled sheet catalogue (mass table)
- Engineering ToolBox — sheet metal gauge table
- JIS G 3141, JIS G 3193, JIS G 4305 — dimensions and standard thicknesses of steel and stainless sheet
The values on this page are reference data from the standards and sources named above. They are not statements of our manufacturing capability, stock or lead time.